Only upto 40% of the original oil in place could be extracted from the oil reservoir using water flooding, the so-called primary recovery method . A large portion of oil is left behind as immobile ganglia. The enhanced oil recovery (EOR) techniques, the secondary recovery methods, are hence needed to extract the remaining oil. Polymer flooding is one such technique. In this EOR techniques, the injected water is supplemented with the long chain polymers which makes the injected water an visco-elastic fluid with a tunable viscosity. The primary purpose of adding polymer is to increase the viscosity of the flood water so that he mobility of injected water becomes less then that of oil which maximize the sweep efficiency, creating a smooth flood font without viscous fingering. This EOR technique has been successfully used to effectively recover the remaining oil from the reservoir, up to 30% of the original oil in place.